Category Archives: Citrix

Citrix delivers people-centric solutions that power a better way to work by offering secure apps and data on any device, network or digital workspace.


XCP-ng / XenServer – Your First Virtual Machine Installation

Creating a Windows 10 VM on XenServer / XCP-ng Walkthrough

This video goes through setting up a Virtual Machine in XenServer / XCP-ng in a lab environment. If you want to experiment with in detail with XenServer, I highly recommend you download XCP-ng from their official website. This is a community-powered version of XenServer with ALL FEATURES ENABLED. XenServer from Citrix has recently started going away from its open-source roots and as a result, has begun locking features behind a paywall.

What do you think about this project? Would you like to see more of these videos?  Leave any Questions and Comments below and I will get back to you. I regularly publish on YouTube, Steemit, and so if you’d like to see more videos please like, subscribe, and follow me.


Updating LDAP Credentials for Netscaler VPX 1000

This article shows you how to update LDAP credentials on the Netscaler VPX 1000. It goes over logging in, editing virtual server, and applying settings.

Login to the NetScaler Device

Default User: nsroot Pass: nsroot (or password you changed it to)

Go to Netscaler gateway virtual server controlling your logins


Click on LDAP Policy and select Edit Server


Fix the credentials under connection settings


Re-attach LVM after a reinstalling XenServer

This article describes how to introduce a local Storage repository (SR) on XenServer. The XenServer database has become corrupt or your XenServer does not see the local SR.


  • Do a pvscan to get the Universally Unique Identifier (UUID) of an existing SR on a local disk. This example uses UUID 39baf126-a535-549f-58d6-feeda55f7801:

PV /dev/sda3 VG VG_XenStorage-39baf126-a535-549f-58d6-feeda55f7801 lvm2 [66.87 GB / 57.87 GB free]
Total: 1 [66.87 GB] / in use: 1 [66.87 GB] / in no VG: 0 [0 ]

Note the output above, the VG name of the local drive /dev/sda3 is VG_XenStorage-39baf126-a535-549f-58d6-feeda55f7801 . The VG name contains the SR UUID that resides on this storage media. In this case, the UUID is 39baf126-a535-549f-58d6-feeda55f7801.

  • Introduce the SR with the following command:
    xe sr-introduce uuid=39baf126-a535-549f-58d6-feeda55f7801 type=lvm name-label=”Local storage” content-type=user
    This command sets up database records for the SR named “Local storage”
  • Locate the SCSI ID of the device or partition where the SR data is stored:
    ls -l /dev/disk/by-id/

total 0
lrwxrwxrwx 1 root root 9 Jan 15 09:44 scsi-SATA_ST3500320AS_9QM13WP2 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 15 09:44 scsi-SATA_ST3500320AS_9QM13WP2-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Jan 15 09:44 scsi-SATA_ST380815AS_6QZ5Z1AM -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 15 09:44 scsi-SATA_ST380815AS_6QZ5Z1AM-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 15 09:44 scsi-SATA_ST380815AS_6QZ5Z1AM-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 15 09:44 scsi-SATA_ST380815AS_6QZ5Z1AM-part3 -> ../../sda3

In this case, the SCSI ID of the device /dev/sda3 is scsi-SATA_ST380815AS_6QZ5Z1AM-part3.
This is the device name to use in the next command, where a PBD (physical block device – a connector between the XenServer host and the SR) is created.

  • Run the xe host-list command to find out the host UUID for the local host:
    xe host-list

uuid ( RO) : 83f2c775-57fc-457b-9f98-2b9b0a7dbcb5
name-label ( RW): xenserver1
name-description ( RO): Default install of XenServer

  • Create the PBD using the device SCSI ID, host UUID and SR UUID detected above:
    xe pbd-create sr-uuid=39baf126-a535-549f-58d6-feeda55f7801
    device-config:device=/dev/disk/by-id/scsi-SATA_ST380815AS_6QZ5Z1AM-part3 host-uuid=83f2c775-57fc-457b-9f98-2b9b0a7dbcb5

Displays after run: aec2c6fc-e1fb-0a27-2437-9862cffe213e

  • Attach the PBD created with xe pbd-plug command:
    xe pbd-plug uuid=aec2c6fc-e1fb-0a27-2437-9862cffe213e

The SR should be connected to the XenServer host and be visible in XenCenter.

Source: Original Article from Citrix (


XenServer 6.5.0 tapdisk experienced an error

When re-attaching a SR on a fresh VM, I ran into this error. I ran the following from XenServer console to eject all CD drives on that host. I was then able to start the VM with the old image.

xe vm-cd-eject --multiple

If your XenCenter hangs or becomes unresponsive, you can also reset the toolstack from console from a PuTTy session or if XenCenter console is working running the following command:


Let me know in the comments below if you have any issues or if you find another solution to your problem.


Citrix XenCenter gives “Could not create SSL/TLS Secure Channel” when connecting to server

This is how you fix the error Could not create SSL/TLS Secure Channel in XenCenter. This error is caused by Windows 10 requiring stronger encryption. This is prevalent on older XenServer installations that cannot be easily upgraded to XenServer 7+.

Here is the process:

  • Putty in using SSH
  • service xapissl stop
  • mv /etc/xensource/xapi-ssl.pem /etc/xensource/xapi-ssl.pem.bak
  • /opt/xensource/libexec/generate_ssl_cert “/etc/xensource/xapi-ssl.pem” ‘’
  • service xapissl start
  • xe-toolstack-restart

Where you see this is the IP of your XenServer that you are connecting to (not VM ips). This will reissue the cert and you should be able to properly connect. I’ve seen this on Windows 10 Systems since they force the higher level encryption.